XSEL Software Training with TTA Table Top Robot – IAI Electric Actuator Manufacturer,
https://www.intelligentactuator.com/x-sel-pc-interface-software-tutorial/
Easy to learn how to use XSEL Software.
Focus on Program and Position (Data Table).
1: Program
Input to the program data sheet in the PC software all necessary commands in the “SEL language” (IAI’s original language) that instruct the details and sequence of operations.
2: Postion (Data Table)
Determine the positions to move the robot to, and input them to the position data sheet in the PC software as coordinates.
TTA: Multi-Axes Table Top Robot
Improved Tabletop Robot for Cell Production Applications, Featuring Significantly Higher Payload, Maximum Speed and Rigidity!
1: Significantly Higher Payload and Maximum Speed
2: Stores Much More Programs and Positions
The larger memory lets you store much more programs and positions.
The additional data recovery function makes sure the original data can be restored should writing to a FLASH drive fails due to a power failure.
3: Three Times As Many I/O Points As Conventional Models
When the standard I/O slot isn’t enough, up to two additional expansion I/O slots can be installed.
4: Variations
Four operating ranges are available to choose from.
The 3-axis specification is available in two types of Z-axis strokes: 100mm and 150mm.
You can select a model ideal for the size of your work part. Additional options let you change the Y-axis height and position.
5: Greater Bending Rigidity is Achieved by Integrating the Structure of the Y-axis Base with the Mounting Bracket.
6: Labyrinth Structure to Suppress Intrusion of Foreign Matter into X-axis
The X-axis opening is structured as a labyrinth in order to make it difficult for foreign matter dropping onto
the actuator (such as screws, molten metal, dust, etc.) to enter the X-axis. This expands the types of work environment supported.
Post time: Jun-12-2017