Contact: +91 9815216606 , +91 9056960606. This project is an effort to automate most common and day to day application used by everyone in this world named as Cooking Assistant. It consists of the modules Microcontroller Unit, regulated power supply, Display unit (LCD), Switch pad, Relay driver circuit. At beginning user have to give input of required temperature. Then after giving input temperature sensor will start measuring the temperature and MCU will display it on LCD as well as compare it with the required temperature. If actual temperature is less than the required temperature then MCU will give command to the heating element to switch on through relay to increase the temperature. And if the actual temperature is greater than the required temperature and then MCU will give command to the Cooling element to switch on through relay to decrease the temperature. When required temperature is achieved then both the relays will remain switched off.
Post time: Jun-13-2017