Quality Inspection for TU-011 thermostatic cartridge wax sensor for sanitary ware for Puerto Rico Factories

Explanation of car’s engine cooling system – basic principles anyone can understand, its operation and major components. Shows cross-section diagrams and test equipment in use to troubleshoot failing system. Shows basic thermostat test.
Transcript provided for the hearing impaired:
Alright, today on Repairs101 I thought I’d go over the basics of how your car’s cooling system works.
So an engine’s primary function is to produce power or motive force and one of the by products it creates as a result is heat.
So the system developed to extract heat is fairly simple. A fluid – mostly water – is run through the passages and galleries in the engine. Then when the fluid reaches temperature, it’s released into the radiator. There it exchanges heat with the relative wind from forward momentum or by the air forced over the radiator by a fan.
Now the heart and the brains of the cooling system, respectively, are the water pump and the thermostat.
The water pump is usually found on the front of an engine, belt driven and used to circulate coolant from the engine block to the radiator.
The thermostat is an automatic valve that opens when the water inside the engine hits a predetermined temperature. When it opens the coolant flows until the fluid inside the engine is cool enough to shut the thermostat again.
Now the radiator is a fluid – air heat exchanger that has tiny passages in it with large surface areas exposed to the cool air.
You can test your cooling system by pressurizing it cold with a pressure test kit. You can see the fluid escaping as I release the pressure – so never open a hot rad cap because the heat tells you it’s under pressure.
Now the cap has two functions – one, to seal the system so it will pressurize when it’s heated – and two, to blow off excess fluid due to thermal expansion when it becomes over-pressurized.
In the old days the coolant would just dump out onto the street. Modern designs will catch the fluid from the overflow tube, and redirect it into an expansion tank where it will be collected and then drawn back into the system as it cools off.
Alright thanks for watching and hey! Don’t forget to subscribe!

Model YX-CB series carbon dioxide mixer automatic C02 beverage drinks blending mixing equipment juice water agitator food packaging industry
Carbonated Drink Mixer is applied for carbonation and proportion mixing of various gas beverages (water, syrup, and CO2), such as lemon and Cola. Carbonated Drink Mixer is the main equipment among the complete equipment of beverage production line (especially the key equipment producing middle-and top-level beverage).
YX-CB series Carbonated Beverage/Drink Mixer
Features of beverage drinks blending mixing machines liquid blender equipment:
Carbonated Drink Mixer , after the adoption of advanced technologies in the chemical industry—static mixer (carbonizer), features large area of gas/liquid mass transfer, small resistance loss, high efficiency, low energy consumption, and simple structure. Carbonated Drink Mixer also adopts the multi-stage centrifugal pump with reliable performance and low noise, guaranteeing the performance of the whole machine.
The mixing proportion is accurate and easy for adjustment. With no need of parts replacement, Syrup water CO2 drink mixer can realize the quick output adjustment and the proportion of syrup and water.
Carbonated Drink Mixer , by use of CO2 reflux deoxidation, not only saves CO2, but also achieves the objective of deoxidation and makes the deoxidation water have better pre-carbonation effects.
Carbonated Drink Mixer is convenient to adjust the gas content. According to the requirements of beverage gas content, the adjustment can be done through proper operation.
Carbonated Drink Mixer has perfect automatic control system, featured by coordinate action, simple structure, continuous production, and high automation.
Working principle and main characteristic
Working principle:
When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180°to wash, then return back to their original position after enough washing and drying. Then, the bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. At last, bottles are sent to the conveyor chain by the out stirring wheel to next working position.
Main Technological Data of CO2 beverage drinks filling packaging machinery:
Type YX-CB1500
Production Capacity (kg/h) 1000 – 1500
Adjust Proportion of Syrup and Water 1:3 1:10
Gas Qty 1.5-2.5
Cool Water Entry Temperature 0 – 5
Working Pressure (MPa) 0.05
Storage Tank Working Pressure (MPa) 0.2 0.5
Power (KW) 1.5
Dimension (mm) 900 * 700 *2000
Weight (kg) 500

Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like Model YX-CB series carbon dioxide mixer automatic C02 beverage drinks blending mixing equipment juice water agitator food packaging industry,please email via jackdu999@yahoo.com or browse our website https://penglaichina.com.
Follow us on twitter:https://www.twitter.com/jackdu007
Like us on facebook:https://www.facebook.com/jackdu999
Skype us by :turnanewleaf
Call us via:0086-15811882441