OEM/ODM Factory for TU-1K01 thermal wax actuator for electric switch valve for Amman Factory
Short Description:
Product Detail
Product Tags
OEM/ODM Factory for TU-1K01 thermal wax actuator for electric switch valve for Amman Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for OEM/ODM Factory for TU-1K01 thermal wax actuator for electric switch valve for Amman Factory, The product will supply to all over the world, such as: Accra , Detroit , France , For many years, we have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
Screw or cone type log splitter.
Built using an ebay kit for the screw, shaft, bearings and 200mm pulley.
The Motor is a 2.2kw (3hp) single phase 2800rpm with an 80mm pulley giving approximately 1000rpm at the splitter. I used this motor as it is the biggest I could run safely on a 13amp plug.
In this video I’m splitting alder and birch.
It currently runs too quick to split large discs of harder woods but is nice and fast for splitting down smaller stuff and making kindling.
The last bit of the video shows the procedure for reversing it when it jams.
In an April seminar hosted by the MIT Energy Initiative, Dr. Gail Brager, a professor at the University of California, Berkeley, discussed her views that too many buildings harm the planet without properly serving their occupants. Buildings contribute roughly 40% of the total US greenhouse gas emissions, and 80% of their energy use is for heating, cooling, ventilating, and lighting. Yet research shows there are still high levels of occupant dissatisfaction with indoor environmental quality, and this can have profound impacts on people’s health, comfort, performance, and overall well-being. Using a range of research examples, Professor Brager’s presentation described new ways of studying, designing, and operating buildings to improve both energy and comfort performance, which must be simultaneous goals of a high-performance building.
This talk was presented on April 5, 2017 as part of the MITEI Seminar Series.
About the speaker:
Gail Brager is a professor in the Building Science Program of the Department of Architecture at the University of California, Berkeley, and the associate director of the Center for the Built Environment, an industry/university collaborative research center with more than 40 industry partners from various sectors of the building industry. She has a PhD in mechanical engineering and over 30 years of experience in teaching and research addressing the design, operation, and assessment of buildings to simultaneously minimize energy consumption while enhancing indoor environmental quality. She has particular interests in thermal comfort and adaptation, natural ventilation and mixed-mode buildings, and personalized comfort systems.
