OEM/ODM Factory for TU-028 thermostatic cartridge wax sensor for sanitary ware for Swedish Manufacturers
Short Description:
Product Detail
Product Tags
OEM/ODM Factory for TU-028 thermostatic cartridge wax sensor for sanitary ware for Swedish Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Fast and great quotations, informed advisers to help you choose the correct solution that suits all your requirements, a short creation time, responsible top quality manage and distinct providers for paying and shipping affairs for OEM/ODM Factory for TU-028 thermostatic cartridge wax sensor for sanitary ware for Swedish Manufacturers, The product will supply to all over the world, such as: Lesotho , Kyrgyzstan , Germany , We are increasingly expanding our international market share based on quality products, excellent service, reasonable price and timely delivery. Please contact us at any time for more information.
How to clean the throttle body on a 4 cylinder 2AZ-FE Toyota.
The intake must be removed to access the throttle body at the back of the engine bay.
First, the air box and vacuum lines are removed, exposing the air filter. The air intake tube is then removed by loosening hose clamps around the throttle body.
With the ignition in ON, floor the pedal to open the butterfly valve, since this vehicle is drive by wire. Use a toothbrush and throttle body cleaner to clean the carbon deposits in the throttle body. Clean excess cleaner with a rag and replace all components.
The first start on the car will be hard and may require throttle input to burn the cleaner in the intake. If a check engine light illuminates, disconnect the battery for a few minutes to clear the code.
Procedure was shown on a 2003 Toyota Camry 4 cylinder. Same procedure applies to 4 cylinder Rav4, Scion tC, Highlander, Solara and XRS Corolla and Matrix with the 2.4L engine.
Perform a throttle body or idle air control valve cleaning if your car idles and runs rough, won’t start, has reduced throttle response or is getting bad fuel economy. Its also a good time to clean out the MAF (mass airflow sensor), PCV valve and change the air filter if it is dirty.
