Massive Selection for TU-1C01 thermal wax actuator for air conditioner and compressor to Kuala Lumpur Factories
Short Description:
Product Detail
Product Tags
Massive Selection for TU-1C01 thermal wax actuator for air conditioner and compressor to Kuala Lumpur Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Sticking to your belief of "Creating solutions of high quality and generating buddies with people from all around the world", we always put the fascination of customers to start with for Massive Selection for TU-1C01 thermal wax actuator for air conditioner and compressor to Kuala Lumpur Factories, The product will supply to all over the world, such as: Southampton , Puerto Rico , Rio de Janeiro , Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers' satisfaction and achieve win-win situation .
Let us consider a scenario where the driver hits the brakes hard on a slippery surface. Without ABS, the wheels will lock up or ‘slide’ and the driver will now have no control over which direction the car takes (since steering now becomes useless) and has no way of avoiding collisions. On a car with ABS, the wheels will not lock up and so the driver can still effectively steer the vehicle and dodge obstacles as he judges fit. A car with working ABS is therefore much safer to drive/control than one without.
An ABS system consists of the following components:
Wheel speed sensors
Brake calipers
A hydraulic motor
Pressure release valves contained in an actuator body.
And a very quick thinking computer (or control module) which coordinates the whole braking process.
Whenever you step on the brakes, your foot is actually pressurising a hydraulic system which causes the brake pads to squeeze against and hold the rotating discs, which effectively causes the car to slow down. If the ABS system (through the sensors located in the wheel hub/assembly) detects that one wheel is slowing down more rapidly than the rest (a symptom of wheel-lock) it automatically reduces the brake pressure on this wheel by opening a pressure release valve in the hydraulic system. When that wheel’s speed matches that of the others again, ABS also has the ability to build the pressure back up to normal via the hydraulic motor. The system reacts remarkably quickly, and compares wheel speeds many times a second.
ABS systems can act on just the front wheels (which normally do most of the braking work) or on all four depending on what car you’re driving. When all four wheels are braking heavily as a result of heavy brake pedal application, and one of them is about to lockup (locally called ‘sliding’) due to a low friction surface such as ice/mud/gravel, the ABS control module detects the onset of a skid through the sensor in this wheel and reacts by ordering the ABS actuator to release the brake pressure slightly by rapidly opening a pressure release valve for only this wheel but leaving all other three wheels to brake as they normally should. This lowers the pressure in the brake pipe going to this wheel which causes the brake caliper to loosen its grip on the brake disc on the locking wheel. Once this corrects the locking wheel, the hydraulic motor will build up the pressure again to the optimum braking force and the valve will revert to the closed position.
Note that ABS does not operate all the time. It only does when you brake harshly in an emergency on a slippery surface. Most of the time, the brakes will operate without ABS interference. If you have driven a car with ABS operating, you will notice that the wheels appear to lock and release in jerky movements, this is because there is such a fine line between grip and traction loss in these conditions, and the system constantly tries to keep the pressure at the point just before lock up (which is the most effective pressure for slowing down).
ABS works best with a firm, steady application of pressure to the brake pedal. During ABS operation you are likely to experience some vibrations, which are the pressure release valves opening and closing and an indication that the system is working correctly. Do not release the pedal until you have safely stopped.
You may have heard that it’s possible to slow down quicker in a car without ABS. This has elements of truth, but in practical terms, the benefits of ABS massively outweigh the slightly longer braking distances. For normal road use, ABS is an absolute must as it will allow you to steer out of the way of unexpected hazards.
https://www.intelligentactuator.com/
In a system for performing the alignment of some resin blocks, the ROBO Cylinder was adopted. The company’s products include designer plates to be used on the floor of a house by bonding resin blocks.
Previously, an air cylinder was used, this was changed to ROBO Cylinder which improved the cycle time and reduced the occurrence of Choco-Tei events.
When air cylinder was used:
Because the resin blocks were misaligned by the impact of the air cylinder stop, they were operating it at a reduced speed. However, Choco-Tei was still occurring about 10 times a day because of the misalignment due to unstable speed. To rearrange the resin block and to recover from Choco-Tei, it took about 1 minute.
After changing to ROBO Cylinder:
By replacing air cylinder to ROBO Cylinder, and adjusting the pressing force and acceleration/deceleration, they could increase the operating speed while minimizing the impact at the time of stop. In addition, Choco-Tei was reduced to near zero.
