Manufactur standard TU-1D01-100 thermal wax actuator for automobile thermostat to New Orleans Manufacturers
Short Description:
Product Detail
Product Tags
Manufactur standard TU-1D01-100 thermal wax actuator for automobile thermostat to New Orleans Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We have state-of-the-art equipment. Our products are exported for the USA, the UK and so on, enjoying a fantastic status among the clients for Manufactur standard TU-1D01-100 thermal wax actuator for automobile thermostat to New Orleans Manufacturers, The product will supply to all over the world, such as: Honduras , Paris , Mauritius , Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
I built an indoor air quality monitor on my Arduino Mega 2560 ( the Mega 2560 was a little over kill for this portion of the project, but I have plans to add Ethernet and an instrumentation amplifier to the same monitor). Final plans for this project include monitoring the solar system battery state and each charge controller along with temperature, humidity and CO2 levels by pushing the data to the MadScientistHut website so that I can monitor some stuff while I am away from the house.
The project currently uses a DHT22 to monitor the Temperature and Humidity. It monitors CO2 PPM with a GE, Telaire T6004 NDIR (Non-Dispersive InfraRed) compact carbon dioxide sensing module.CO2 PPM meter, that I got by removing the CO2 PPM meter from some surplus building monitoring equipment. The display is an 2X16 LCD Keypad shield. The sensors are soldered to a proto shield.
I will eventually create an Arduino library for the Telaire CO2 monitor, but not until I figure out the altitude calibration routine, but that may take some time.
Iron Baltic IB Mini-Motion Package (MMP) is an electric over hydraulic linear actuator featuring an electric DC motor integrated with hydraulic valves, pump and cylinder in a compact package.
The MMP is an entirely self-contained unit with no external piping, thus eliminating the possibility of oil leakage. The oil tank is sealed, which allows for no restrictions on the mounting position. The MMP is lightweight and compact and is suitable for both indoor and outdoor applications.
A pilot-operated check valve makes the cylinder load retention firm and sure and results in zero backlash. It displays excellent vibration dampening and its load retention resists external force up to 13.7 MPa. A manually-releasable valve is installed to extend and retract the cylinder during a power outage or wire disconnection.
The MMP is made for outdoor use and has waterproofing standard of JIS D0203 D2 and an Ingress Protection rating of IP67.
Manufacturer: KYB
Model: MMP4 – B1B250BB – DHR
Extension force: 1800 lbs
Relief valve pressure: 7.1 MPa
Cylinder size: 20 mm / 0.8”
Cylinder arm diameter: 250 mm / 9.8”
Cylinder stroke: 380-630 mm / 15-24.8”
Mounting eye diameter: 15,9 mm / 5/8”
Power supply: 12V DC
Weight: 5 kg / 11 lb
Dimensions (L x W x H): 420-670 x 80 x 136 mm / 16.5-26.4 x 3.1 x 5.4 in
Packed dimensions: 450 x 100 x 250 mm / 17.7 x 3.9 x 9.8 in
The MMP is easily interchangeable from one product to another and one actuator fits all implements and can be moved from one to another easily.
Electric power comes from the power source of the ATV.
Wiring harness & switch kit (part number 70.2000) required for installation.
For more information visit: https://www.ironbaltic.com/index.php?id=46&action=show_product&product_id=1918
For all our products visit https://www.ironbaltic.com
