Good quality 100% TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve to Suriname Factory
Short Description:
Product Detail
Product Tags
Good quality 100% TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve to Suriname Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We constantly think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body along with the living for Good quality 100% TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve to Suriname Factory, The product will supply to all over the world, such as: Lithuania , French , Oman , We will do our utmost to cooperate & satisfied with you relying on top-grade quality and competitive price and best after service ,sincerely look forward to cooperating with you and make achievements in the future!
My 2013 Nissan Versa has had a heat shield come loose and rattle three different occasions. The first two were covered by warranty and both occurred during the first year of me owning it. My warranty was up during that first year, and it has held until about a month ago. The guy at the dealership told me it was between the engine and the transmission. I never worried about it, as it was under warranty at the time. However the heat shield that was doing the rattling was actually about the exhaust pipe on the passenger side of the car towards the rear. It takes a 10mm socket to tighten/loosen the bolts. The heat shield actually broke off from the part that the bolt attached to, so I just loosened the bolt and tucked that part under the second part of the heat shield. I’m sure it’ll come out again, but atleast this’ll stop that annoying rattle. I hope this video may help someone else who has had this problem. Thanks for watching!
In this video I remove clean and reinstall a non locking hood latch on my 1999 Volvo V70 (Classic) 2.5D.
