Factory selling TU-1C90 thermal wax actuator for thermostatic automatic water drain valve for Lisbon Importers
Short Description:
Product Detail
Product Tags
Factory selling TU-1C90 thermal wax actuator for thermostatic automatic water drain valve for Lisbon Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Our personnel are always in the spirit of "continuous improvement and excellence", and with the superior quality products, favorable price and good after-sales services, we try to win every customer's trust for Factory selling TU-1C90 thermal wax actuator for thermostatic automatic water drain valve for Lisbon Importers, The product will supply to all over the world, such as: Albania , Philippines , Israel , With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
tank.
Commonly we will find to forget switching off the motor switch and we will find water flows out of the waterThis was the water level indicator.we will place the different wires in the different levels of the water tank.in first three levels we will get the led’s glow one by one.then in the final level we will get sound and we will recognise that water tank is full.and we will switch off the motor switch.
Getting ready for the 2014-2015 snow season with a quick clean and wax session.
Here’s a quick and dirty guide to waxing your board:
1. Clean the base with a citrus based cleaner, get in there with a scotch-brite pad and remove any impurities
2. Heat your board with a heat gun or air dryer. This allows for the board to expand and the pores to open, allowing for more wax saturation into the core.
3. Using a heated iron, drip wax along the edges of the board, tip to tail
4. Work the wax in with the iron creating a smooth even coating from tip to tail.
5. Drip wax down the center of the board and work in to fill in the gaps and create smooth coverage.
6. Let the board sit for 30 minutes to 1 hour to allow the wax to set
7. Using a plastic scraper (DaKine Triangle) scrape the excess way off the board, again, from tip to tail.
8. Give the board a thorough buff with a medium AND soft scotch-brite pad to remove any impurities and imperfections that may be left over from your scraping.
.:A Few Important Tips:.
- Remove or thoroughly loosen your bindings before you wax your snowboard, they can cause divots during the waxing process.
- Never leave the iron in one place to long or you can cause permanent damage to the board
- When heating the board, you just want to warm the core and allow for expansion; you don’t need to try and heat the board up to the extreme.
- Take your time and go slow, make sure your wax coverage is even and clean, you don’t want to strip your board and do it all over again because you were in a rush.
- Most importantly, grab a beer and a buddy and have a good time, waxing a board and getting ready for the season should be enjoyable not a hassle.
If you’re looking for a great step by step resource I highly recommend https://www.youtube.com/watch?v=FB6-wmMclUg
Hope this video helped, enjoy the pow!
