Factory making TU-031 thermostatic cartridge wax sensor for sanitary ware Supply to Plymouth
Short Description:
Product Detail
Product Tags
Factory making TU-031 thermostatic cartridge wax sensor for sanitary ware Supply to Plymouth Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of Factory making TU-031 thermostatic cartridge wax sensor for sanitary ware Supply to Plymouth, The product will supply to all over the world, such as: Tunisia , Botswana , Barcelona , With well educated, innovative and energetic staff, we are responsible for all elements of research, design, manufacture, sale and distribution. By studying and developing new techniques, we are not only following but also leading fashion industry. We listen attentively to the feedback from our customers and provide instant replies. You will instantly feel our professional and attentive service.
First time power up and test of my Arduino controlled can cooler.
The Cooler Uses 4 Peltier Modules, A custom machined cooling block and A custom water loop to remove the heat.
It has a 4.3″ Touchscreen Interface to select Temp and display Temps of the cooling block, Can, The hot side of the 4 Peltiers and Cooling Progress.
Cools a 330ml can from 19 to 1C in approx 10 minutes (Quicker if the block is already cool).
The cooler draws approx 360W (varies slightly with temperature variations).
This is just a test so there are a few bugs/ glitches in the programming in the video. Most have been fixed since recording.
All the components are mounted on my old Litecoin mining rig, Eventually i want to build the cooler into a PC case To provide better protection to the components and make the unit more portable.
The cooling block will reach Temps approx 30C cooler than room temperature with no thermal insulation around the block.
Thanks For Watching
How to test thermocouples with meter and brief description of how they work. Furnace, water heater, ovens and more all use these. Please post any questions …
