Factory directly provided TU-1J02 thermal wax actuator for electric switch valve for Curacao Factories
Short Description:
Product Detail
Product Tags
Factory directly provided TU-1J02 thermal wax actuator for electric switch valve for Curacao Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Factory directly provided TU-1J02 thermal wax actuator for electric switch valve for Curacao Factories, The product will supply to all over the world, such as: Indonesia , UK , Kenya , We believe with our consistently excellent service you can get the best performance and cost least products from us for a long term . We commit to provide better services and create more value to all our customers. Hope we can create a better future together.
Once your Hep2O underfloor heating system has been installed and tested, you can install the actuators to the manifold and connect it to the control unit. The thermostats can then be paired to any number of channels.
To completed the commissioning process, you will need to balance the circuit and set the manifold temperature valves.
The temperature control valve on the manifold will be fixed at setting 3. This is done to protect the new floor from overheating. To adjust this setting, simply press the key ring in. This will then free up the control valve and allow you to set the manifold to a higher temperature.
