Factory Cheap Hot TU-011 thermostatic cartridge wax sensor for sanitary ware to Libya Factories
Short Description:
Product Detail
Product Tags
Factory Cheap Hot TU-011 thermostatic cartridge wax sensor for sanitary ware to Libya Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Factory Cheap Hot TU-011 thermostatic cartridge wax sensor for sanitary ware to Libya Factories, The product will supply to all over the world, such as: Pretoria , US , Lithuania , Based on products with high quality, competitive price, and our full range service, we have accumulated professional strength and experience, and we have built up a very good reputation in the field. Along with the continuous development, we commit ourselves not only to the Chinese domestic business but also the international market. May you moved by our high quality products and passionate service. Let's open a new chapter of mutual benefit and double win.
We suspended 1 cm x 1 cm x 1.5 mm 20% PEG hydrogel into radical solution (1.2 M) and placed the reservoir into the magnetic setup (Supplementary Figure 12), which showed the levitation of hydrogel due to paramagnetism of radical solution.
I built an indoor air quality monitor on my Arduino Mega 2560 ( the Mega 2560 was a little over kill for this portion of the project, but I have plans to add Ethernet and an instrumentation amplifier to the same monitor). Final plans for this project include monitoring the solar system battery state and each charge controller along with temperature, humidity and CO2 levels by pushing the data to the MadScientistHut website so that I can monitor some stuff while I am away from the house.
The project currently uses a DHT22 to monitor the Temperature and Humidity. It monitors CO2 PPM with a GE, Telaire T6004 NDIR (Non-Dispersive InfraRed) compact carbon dioxide sensing module.CO2 PPM meter, that I got by removing the CO2 PPM meter from some surplus building monitoring equipment. The display is an 2X16 LCD Keypad shield. The sensors are soldered to a proto shield.
I will eventually create an Arduino library for the Telaire CO2 monitor, but not until I figure out the altitude calibration routine, but that may take some time.
