Excellent quality for TU-1D03 thermal wax actuator for industrial thermostatic water regulations mixing valve to Johor Importers
Short Description:
Product Detail
Product Tags
Excellent quality for TU-1D03 thermal wax actuator for industrial thermostatic water regulations mixing valve to Johor Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We know that we only thrive if we could guarantee our combined price tag competiveness and quality advantageous at the same time for Excellent quality for TU-1D03 thermal wax actuator for industrial thermostatic water regulations mixing valve to Johor Importers, The product will supply to all over the world, such as: Saudi Arabia , Slovak Republic , Bulgaria , We follow up the career and aspiration of our elder generation, and we are eager to open up a new prospect in this field, We insist on "Integrity, Profession, Win-win Cooperation", because we have a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.
Simple demonstration of a temperature sensor. I have used an Atmel MCU to measure the temperature coming from the LM35 sensor. It outputs a voltage with a slope of 10 mV/°C.
The MCU provides an internal SAR ADC with 10-bit resolution. The Analog Reference was set by software to 2.56 V. This voltage is auto-generated by MCU so it won’t need any external reference. By this settings the ADC result will correspond to 0×004 (10-bit) for each celsius grade. The MCU allows to Left Adjust the ADC result, so you can get the 8 MSB of the 10 bit conversion. Notice that with 10-bit resolution and 2.56 V as Analog Reference you can use the 8 MSB of the result without making strange calculations, in fact each ADC unit (of the 8 MSB) corresponds to 1°C. Very good! (just make some calculations to demonstrate it).
However by taking the 8 MSB you have a resolution of 1°C. So, if you need more resolution, just consider also the 2 LSB. 2 bits correspond to 4 cases, so by considering the 2 LSB you can have a resolution of 1/4 °C. Not bad!
Finally, after a conversion of the ADC result to ASCII character, the temperature is displayed into the LCD with a refreshing rate of 1 Hz.
In future I’ll implement a clock by getting the time from the DS1307 RTC. It needs of TWI (or I2C) communication to be read/written.
-The MCU used is ATmega8535 (datasheet link: https://www.atmel.com/images/doc2502.pdf)
- The LCD Display controller is KS0070B (the logic is compatibile with Hitachi HD44780 controller)
-The Temperature Sensor used is LM35DZ (datasheet link: https://www.ti.com/lit/ds/symlink/lm35.pdf)
=== UPDATE #1 12-08-2013: ===
Get the source code!
- Source code: https://github.com/alfeale/temperature-sensor-w-lcd
https://www.tlsautorecycling.com/part-car/113169.html Call 877-247-1717
TLS Auto Recycling is parting out Toyota Sienna 2012 for used parts. Stock # 3067BR. Save up to 60% on Used Toyota Sienna Parts.
AC CONDENSER
AIR CLEANER
AIR FILTER BOX
BELT MOLDING FRONT
BUMPER REINFORCEMENT, FRONT
BUMPER REINFORCEMENT, REAR
CARRIER
CD CHANGER
DOOR ASSEMBLY, FRONT
DOOR MOLDING, FRONT
DRIVE LINE, REAR
EXHAUST PIPE
FRONT DIFFERENTIAL
HATCH TRIM PANELS
INTERMEDIATE EXHAUST PIPE
NAVIGATION PLAYER
PARTS CARS TRUCKS
RAD COND FAN ASSY
RADIATOR
RADIO AUDIO / AMP
REAR DIFFERENTIAL
REAR DRIVE SHAFT
RECEIVER
SPINDLE KNUCKLE, FR
SPOILER, REAR
STRUT
THIRD MEMBER
TRANSFER CASE ASSY
TRANSMISSION
TRUNK TRIM PANEL
TRUNK TRIM PANELS
VACUUM SWITCH VALVE
https://www.tlsautorecycling.com/part-car/113169.html
