China Wholesale for TU-021 thermostatic cartridge wax sensor for sanitary ware to Peru Factory
Short Description:
Product Detail
Product Tags
China Wholesale for TU-021 thermostatic cartridge wax sensor for sanitary ware to Peru Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of China Wholesale for TU-021 thermostatic cartridge wax sensor for sanitary ware to Peru Factory, The product will supply to all over the world, such as: Jeddah , United States , Macedonia , Till now, the items list has been updated regularly and attracted clients from around the globe. Comprehensive facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are likely to help you get thorough acknowledge about our goods and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
An animation of the hydraulic rotary actuator shown in the video posted by AvE. This is not a hydraulic motor as the output shaft only rotates 360 degrees in total, but the output torque is substantially higher.
Original video: https://www.youtube.com/watch?v=yZ04iC3J6Mc
The outer housing (yellow) is fixed. Hydraulic pressure drives the piston (green) up and down along the axis of the housing. The output shaft (red) is free to rotate but constrained axially.
The piston is engaged with the housing via a left-handed thread. This causes the piston to rotate at it travels up and down.
The piston is also engaged to the output shaft via a right-handed thread. As the piston moves down, the output shaft is forced to rotate. The rotation of the piston and output shaft are in the same direction, causing the total output rotation to be the sum of:
(piston displacement * piston-housing thread lead) + (piston displacement * piston-shaft lead)
In this model, the piston-housing and piston-shaft leads are the same, though this is not a physical requirement. The result is the rotation of the shaft is double the rotation of the piston. Different leads on the engaging threads can result in more or less output rotation at the expense of torque and internal friction.
https://www.mekanizmalar.com/menu_pneumatic.html
Some manufacturing processes require use of large pneumatic cylinders. If the operation cycle of these cylinders are long, such as bonding of laminated materials, use of a single high pressure line is acceptable. However if the operation cycle is short, like an assemble operation, the use of a single air pressure for forward and retract stroke is not acceptable. This is because the air cylinder consumes ALMOST the same amount of pressurized air in retract stroke as the forward stroke. However the power need is confined to forward stroke, and the retract operation does not require significant power at all. To conserve the valuable pressurized air resources, it is advisable to use lower pressure air for retract operation as shown in this animation. Notice that to achieve this a high pressure air coming from pressure tank is divided into two line one of which is fed to the rod end of the air cylinder after passing through a pressure reducer. Also the connection of air lines to a five port four way valve arranged so that it allows two pressure line connection to one air cylinder as shown.