Cheapest Price Thermostatic Wax Linearity Series to Indonesia Importers
Short Description:
Product Detail
Product Tags
Cheapest Price Thermostatic Wax Linearity Series to Indonesia Importers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility sAcid and Alkali |
Mechanical Impurity |
||
|
B-5-1 |
Liquid |
-20/-5 |
≥7 |
Non. |
Non. |
|
B0-1 |
Liquid |
-15/0 |
≥7 |
Non. |
Non. |
|
B5-1 |
Liquid |
-10/5 |
≥7 |
Non. |
Non. |
|
B15-1 |
Liquid |
0/15 |
≥7 |
Non. |
Non. |
|
B20-1 |
Semisolid |
5/20 |
≥7 |
Non. |
Non. |
|
B25-1 |
Semisolid |
10/25 |
≥7 |
Non. |
Non. |
|
B30-1 |
Semisolid |
15/30 |
≥7 |
Non. |
Non. |
|
B35-1 |
Semisolid |
20/35 |
≥7 |
Non. |
Non. |
|
B40-1 |
Powder, Slice , Column |
25/40 |
≥7 |
Non. |
Non. |
|
B45-1 |
Powder, Slice , Column |
30/45 |
≥7 |
Non. |
Non. |
|
B50-1 |
Powder, Slice , Column |
35/50 |
≥7 |
Non. |
Non. |
|
B55-1 |
Powder, Slice , Column |
40/55 |
≥7 |
Non. |
Non. |
|
B60-1 |
Powder, Slice , Column |
45/60 |
≥7 |
Non. |
Non. |
|
B65-1 |
Powder, Slice , Column |
50/65 |
≥7 |
Non. |
Non. |
|
B70-1 |
Powder, Slice , Column |
55/70 |
≥7 |
Non. |
Non. |
|
B75-1 |
Powder, Slice , Column |
60/75 |
≥7 |
Non. |
Non. |
|
B80-1 |
Powder, Slice , Column |
65/80 |
≥7 |
Non. |
Non. |
|
B85-1 |
Powder, Slice , Column |
70/85 |
≥7 |
Non. |
Non. |
|
B90-1 |
Powder, Slice , Column |
75/90 |
≥7 |
Non. |
Non. |
|
B95-1 |
Powder, Slice , Column |
80/95 |
≥7 |
Non. |
Non. |
Product detail pictures:
Our advantages are reduced prices,dynamic product sales workforce,specialized QC,solid factories,superior quality services for Cheapest Price Thermostatic Wax Linearity Series to Indonesia Importers, The product will supply to all over the world, such as: Luxemburg , Jersey , Congo , Qualified R&D engineer might be there for your consultation service and we will try our best to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
How to Wire PCON CA – Wiring Controller for IAI Electric Actuator – ROBO Cylinder
https://www.intelligentactuator.com/controllers-teach-catalogs/
Accessary Connector (Plug)
0V is connected to “0V”…
Use AWG16 Wire…
24V is connected to “24V”…
Again, Use AWG16 Wire…
MPI and M10 Should come Jumpered…
24V from Controllers goes to the Motor…
Use AWG20 Wire for S1, S2, EMG-, BKRLS…
24V goes to S1, which is connected to S2 internally…
S2 is connected to EMG-…
– see details on the video —
Field Network Controllers
ROBO Cylinder Position Controller PowerCON 150: PCON-CA
ROBO Cylinder Position Controller High-thrust Motor Type: PCON-CFA
1: Supporting seven major eld networks
DeviceNet, CC-Link, PROFIBUS-DP, CompoNet, MECHATROLINK (I, II), EtherCAT and EtherNet/IP are supported. Key
features include wire-saving, direct numerical specication, position number specication, and current position read.
2: PCON-CFA for high-thrust motors
Supported Actuators:
PCON-CA: ROBO Cylinder RCP4 / RCP3 / RCP2 series
PCON-CFA: ROBO Cylinder RCP2-RA8C / RA8R / RA10C / HS8C / HS8R series, ROBO Cylinder splash-proof RCP2W-SA16C / RA10C series
Field Network Type:
DeviceNet, CC-Link, PROFIBUS-DP, CompoNet, MECHATROLINK, EtherCAT, EtherNet/IP
https://www.etrailer.com/Brake-Controller/Tekonsha/39510.html
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to install part number 39510 from Tekonsha. This is their Voyager Proportional Brake Controller. I am going to give you a few quick notes here. We are installing this on a 2008 Ford F150. It does not come with a tow package. It only comes with a basic 4 pole flat. We will show you how to upgrade this vehicle to do a 7 and 4 pole and install a brake controller. To give you a point of reference this is the factory 4 pole that came standard on the 2008 F150. Now if you had a tow package you would have the seven pole already out back here and probably the hitch also. But to convert this what we need to do is plug into that with our adapter. Then you extend the wire and you will splice into it wire harness here.
This is the harness that comes from the front. I am going to take it apart to show you that this here is the blue wiring coming from the port from the front of the vehicle. If you look here this is where we are going to have to splice here to the other side of the connector. Because it does not go all the way through to the other side. So we will have to make our connection from the adapter and splice here. It is practically the only splice we will have to make underneath the vehicle. Next we are going to install the bracket on the bumper of the vehicle. Lets go ahead and install our adapter. While we are here we are going to take a moment and tie up the wires really quick.
Now lets go ahead and put these 2 together. Throw some dielectric grease in there since it will be a most likely be a semipermanent connection. We have to put a zip tie around it just to make sure they stay together. The next step we are going to extend this blue wire since we need it up and closer to the frame. While we are at it we are going to run the hot wire to it. It is the same thing we are doing to the brake controller. This purple wire here is actually used for reverse light lead. Most trailers do not actually use that wire. They are mostly used on RV trailers. Seeing how we will not need it we will go ahead and tuck it back up and way back here. We will go ahead and run our tubes on our wires on the same circuit as the original wires. We will run our blue wire to the brake output here and we will use a quick connect. We will stick some dielectric grease in there to help make it last a little longer. We need to do the same thing for the 12 volt lead. Then we can go ahead and wrap that in electric tape and we are good to go. Now to secure our wires to the harness then we will bundle up the loose wire and install our ground.
Now what we are going to do is mount our ground to this part of the frame here. First we will route these other 2 wires. Next what we are going to do is this ring terminal is a little big for what we need we will go ahead and replace it. Actually we are going to mount our ground point towards the end of the frame to keep all of our wires around the same length. We then install our screw there. Now we can go ahead and bundle up our wires. With that complete we can go ahead and move back towards the front. We can go ahead and make our connections here. What we are going to use is our plug in adapter for our Ford product which will be part number 20260 from Tow Ready. This comes ready with the ends striped so you do not have to worry about that to much. However on the brake controller we still have to strip the ends of the wires and put the butt connectors on them. We are going to match up color to color it is pretty simple.
Now we can go ahead and tape up the wire once we are finished. What we have to do is finish drilling the holes for our bracket on the brake controller so we can mount it. It comes predrilled we just have to finish them off. Up here is an existing screw we can use to help mount the bracket up. We will slip our bracket back here behind the plastic tab that is holding the the dash together. It is doing some of the work for us. Make sure you get it straight and even with the bottom edge. Go ahead and double check it with the brake controller one more time. Once the bracket is in place we can go ahead and install the other screws. Then we can go ahead and install our brake controller. Now we will take the end of the port and plug it into the port under the dash which is practically right above it. After testing the brake controller to make sure everything was connected we are finished. This will conclude the install of part number 39510 from Tekonsha the Voyager Proportional Brake Controller. Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
