15 Years Manufacturer Electric Wax Series Export to Canberra
Short Description:
Product Detail
Product Tags
15 Years Manufacturer Electric Wax Series Export to Canberra Detail:
(1) Special Seal Wax for Electronic Elements
This series of products have very good moisture proof capability and good capability for enduring temperature changed. Its’ hardness and viscosity are temperate, and it’s pliability and plasticity are well. They have excellent electrical property parameters. Their high frequency loss is few. They have no any corrosion. Their various processing property are stable.
This series of products are mainly applicable for dipping electrical coil such as electronic tuner coil, various oscillator coils, adjustable inductance electronic component, electronic transformer and color TV luminance delay,thermal seal to some materials.
(2) Dipping Seal wax for Various Capacitors
This series of products have eight grades, which their common characteristic are excellent insulating property, well moisture proof capability, low loss, well compatibility and oxidation resistance. The drop melting point from 65℃ to 145℃, can be adapt to the demands for insulating envelopments with different ranges.
This series of products are mainly applicable for dipping envelopment of the electronic elements such as line-motivating transformer, color TV delay coil, various film and paper capacitor, porcelain capacitor, etc.
(3) Sealing wax for Power Capacitor
This series of products have outstanding insulation impedance and low loss. They have a suitable air-absorption capacity and appearance surface. Their performance is stable. They have a suitable hardness and viscosity, non-poisonous, tasteless and low acid value.
This series of products are mainly applicable for dipping & seal of the metallic capacitor such as the low-voltage power capacitor, alternating current capacitor, household appliances capacitor, etc.
Product detail pictures:
Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for 15 Years Manufacturer Electric Wax Series Export to Canberra, The product will supply to all over the world, such as: French , Chile , Kuwait , With excellent solutions, high quality service and sincere attitude of service, we ensure customer satisfaction and help customers create value for mutual benefit and create a win-win situation. Welcome customers all over the world to contact us or visit our company. We'll satisfy you with our qualified service!
I need your help troubleshooting a gas oven ignitor.
The ignitor won’t work if you do not have gas or power.
I know the ignitor won’t work if I do not have gas. And yes, I’ve paid the gas bill.
It won’t work if you do not have power either.
The lights are on.
If the oven blew an electric fuse, it shuts off power to the igniter and control board.
The control panel and clock are lit up.
If the control panel is flashing an error code, you may want to power cycle the oven to see if the errors go away, so that the oven will then ignite and run.
There are not any error codes.
If you managed to blow a thermal fuse with the thermostat malfunctioning or the oven temperature control actuator stuck open or another issue, the ignitor won’t work until the thermal fuse is replaced.
It has not overheated to that degree.
So you’re certain the gas valve has not shut due to a safety condition like too much gas or too high a temperature?
As certain as I can be without a repair man telling me so.
You have to turn on the thermostat valve via the oven temperature knob.
That’s like telling me to make sure the thermostat is set to heat when I’m concerned the furnace is not running.
You’d be surprised how many HVAC tech calls are because someone left the thermostat on fan mode when they complain the heat won’t come on. And if the gas oven won’t turn on, it could be because that thermostat knob is broken.
I turn up the heat, and I hear the knob click, and the thing does not come on and ignite.
Then the igniter needs to be replaced.
I’m assuming a match cannot be used in its place.
Whether your gas oven uses an igniter or glo bar, it uses an electrical park or other shock to light the gas and you should never light it with a match. You can turn it on and see if a spark lights up, though not all models let you see that ignition spark.
How can I narrow down the problem?
Turn on a stove top burner. If that can come up with flames, you know the issue is not the gas flow and more likely an igniter or controller in the oven.
So if the stove comes on and there are not any other error codes, I need to look at replacing an ignitor.
Igniters tend to be toward the bottom of the oven, so they can get flooded by boiled over gravy or food debris that fall in the bottom and burn and block the pipe. You may just be able to clean it.
That’s cheaper than replacing it.
Just do not run self-cleaning cycle, or you’ll risk needing to replace the control panel instead of the ignition.
This tutorial shows you how to make your own PneuFlex actuators step by step. You can find the written guide here: …