12 Years Manufacturer Electric Wax Series for Bahamas Factories
Short Description:
Product Detail
Product Tags
12 Years Manufacturer Electric Wax Series for Bahamas Factories Detail:
(1) Special Seal Wax for Electronic Elements
This series of products have very good moisture proof capability and good capability for enduring temperature changed. Its’ hardness and viscosity are temperate, and it’s pliability and plasticity are well. They have excellent electrical property parameters. Their high frequency loss is few. They have no any corrosion. Their various processing property are stable.
This series of products are mainly applicable for dipping electrical coil such as electronic tuner coil, various oscillator coils, adjustable inductance electronic component, electronic transformer and color TV luminance delay，thermal seal to some materials.
(2) Dipping Seal wax for Various Capacitors
This series of products have eight grades, which their common characteristic are excellent insulating property, well moisture proof capability, low loss, well compatibility and oxidation resistance. The drop melting point from 65℃ to 145℃, can be adapt to the demands for insulating envelopments with different ranges.
This series of products are mainly applicable for dipping envelopment of the electronic elements such as line-motivating transformer, color TV delay coil, various film and paper capacitor, porcelain capacitor, etc.
(3) Sealing wax for Power Capacitor
This series of products have outstanding insulation impedance and low loss. They have a suitable air-absorption capacity and appearance surface. Their performance is stable. They have a suitable hardness and viscosity, non-poisonous, tasteless and low acid value.
This series of products are mainly applicable for dipping & seal of the metallic capacitor such as the low-voltage power capacitor, alternating current capacitor, household appliances capacitor, etc.
Product detail pictures:
We have been experienced manufacturer. Wining the majority of your crucial certifications of its market for 12 Years Manufacturer Electric Wax Series for Bahamas Factories, The product will supply to all over the world, such as: El Salvador , Leicester , Malta , we have 8 years experience of production and 5 years experience in trading with the customers all over the world. our clients mainly distributed in the North America, Africa and Eastern Europe. we can supply high quality products with the very competitive price.
New diaphragm valve from Georg Fischer Piping Systems
Twice the flow with optimized flow contours
The new diaphragm valves have decisive advantages in handling and safety, as well as efficiency. The flow in these new valves is twice that of conventional diaphragm valves. In addition, the central plastic thread, which is used in place of the usual four metal screws, guarantees a corrosion-resistant connection.
Not apparent at first glance, but equally important is the more homogenous thermal expansion behavior achieved by the central plastic thread, which eliminates the need for retightening the valve body. The central thread ensures a consistent seat pressure, guaranteeing leak-tightness up to an operating pressure of 16 bar.
New flow contour of the diaphragm valves
The real technological advances of the new generation of diaphragm valves are actually located on the inside. Thanks to the optimized, turbulence-free flow contour the KV value has been doubled. The rounded contours with soft transitions and radii
mean less abrasion and noise transmission, which adds comfort to daily use. The modified geometry of the valve body results in linear control characteristics — and therefore also consistently stable processes.
How the design affects the flow rate of the diaphragm valves can be seen in an independent comparison in which the new diaphragm valves from GF Piping Systems were tested against conventional diaphragm valves. 100% more flow was achieved on average with the optimized, turbulence-free flow contour. And this of course contributes to the economic efficiency of the diaphragm valves with lower running costs and the lower overall cost for media transport.
Material diversity and guaranteed compatibility
A large variety of materials warrant that the valves are compatible with the processes they are used in, thus ensuring safety. Valve bodies can be made of PVC-U, PVC-C, ABS as well as PP-H, PP-n and PVDF, membranes of EPDM, PTFE, FPM and NBR. This range of materials covers nearly the entire spectrum of chemicals with which the diaphragm valves can come into contact. So it makes no difference what type of media needs to be conveyed: From extremely contaminated or solid-containing to highly pure media, from the chemical process industry to microelectronics or water treatment, from cooling to control applications, everything is now possible. The large diversity of connection options means that the valves can be used universally. Compatibility to the global standards for connections, e.g. ISO, BS,
ASTM, ANSI and JIS, as well as to prEN ISO 16138, ISO9393 or EN558 standards have all been taken into consideration. Outer dimensions and connecting dimensions have not been changed from the preceding models. All the new valves are therefore backward compatible and can be built into existing pipelines.
Design diversity
Standard versions of the diaphragm valves are operated manually via an integrated lockable handwheel, which protects against inadvertent manipulation. An optional self-adjusting electrical feedback unit, installed in just a few simple steps, enables automatic control and regulation of piping systems, as well as reliable process monitoring.
Automation of the valves is possible with the Diastar pneumatic valve actuator. Thanks to the three different pressure categories — up to 6 bar, up to 10 bar and up 3/3 to 16 bar — the pneumatically actuated diaphragm valves are quickly and easily integrated into nearly all piping systems. Integrating the valves into system control is no problem with the corresponding interfaces and the wide array of accessories, so individual solutions are always possible.
For more information visit our website:
https://www.gfps.com/appgate/ecat/common_flow/100005/COM/en/index.html
Imprint:
https://www.gfps.com/content/gfps/com/en/service/footer/imprint.html
Disclaimer:
https://www.gfps.com/content/gfps/com/en/service/footer/disclaimer_gfps.html
