Personlized Products TU-032 thermostatic cartridge wax sensor for sanitary ware for Romania Factory
Short Description:
Product Detail
Product Tags
Personlized Products TU-032 thermostatic cartridge wax sensor for sanitary ware for Romania Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
"Based on domestic market and expand overseas business" is our development strategy for Personlized Products TU-032 thermostatic cartridge wax sensor for sanitary ware for Romania Factory, The product will supply to all over the world, such as: Chicago , Puerto Rico , Morocco , We have more than 100 works in the plant, and we also have a 15 guys work team to service our customers for before and after sales. Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!
In this video we’ll show you how to purge your manifold.
This is a simple test to see if the windings in the motor are good. It also checks to see which pairs of wires go to each winding. I used a 3V LED for this test. A 4V or 5V LED should work too. You could also use a lower voltage LED with a resistor and a higher voltage LED might also work. And, of course, you can use a multimeter or incandescent bulb.
