One of Hottest for TU-1C07 thermal wax actuator for air conditioner and compressor to Estonia Factories
Short Description:
Product Detail
Product Tags
One of Hottest for TU-1C07 thermal wax actuator for air conditioner and compressor to Estonia Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Our company aims to operating faithfully, serving to all of our customers , and working in new technology and new machine constantly for One of Hottest for TU-1C07 thermal wax actuator for air conditioner and compressor to Estonia Factories, The product will supply to all over the world, such as: Sri Lanka , Czech republic , Comoros , Ensuring high product quality by choosing the best suppliers, we have also implemented comprehensive quality control processes throughout our sourcing procedures. Meanwhile, our access to a large range of factories, coupled with our excellent management, also ensures that we can quickly fill your requirements at the best prices, regardless the order size.
A quick video showing the single channel fan controller I made with an arduino. When I get the code simplified I will make this a 4-channel device and use it on my PC to control the fans for the liquid cooling loops.
Credit on the circuit goes to Oscar Gonzalez @ bricogeek.com. He designed the circuit using a CNY75 optocoupler to isolate the Arduino from the 12V that is needed to run the fan. From there, I used a 2SC1384 transistor to amplify the PWM signal from the optocoupler. My fan doesn’t like PWM output and makes a high-pitched whining noise, so I used a 220uF capacitor across the motor leads to flatten the PWM output. Not a great solution, but it will work until I can find something better.
Temp sensing comes from an LM35, however since I mostly deal in Fahrenheit, an LM34 would have worked better and eliminated some code for conversion. Trip points are set at 75 for fan shutoff, 85 for fan startup, and 90 for maximum. Once the temp has reached 85, it is dynamically adjusted from 15% – 100% between 75 and 90. Once it drops below 75 it shuts down.
Revision:
I have modified the circuit a bit to drive a larger load using a MOSFET instead of the 2SC1384 NPN Transistor. By increasing the PWM frequency of the ATmega’s timer1 frequency to 31.25kHz the fan whine has been eliminated.
Source code can be found here:
https://pastebin.com/ZRbuetwM
For FAST Delivery visit https://www.restexpress.co.uk/acatalog/briwax.html Traditional wood finishing with Briwax Original Wax Polish, which is available from – www.restexpress.co.uk
