OEM Factory for TU-1C03 thermal wax actuator for industrial adjustable temperature switch control Supply to Indonesia
Short Description:
Product Detail
Product Tags
OEM Factory for TU-1C03 thermal wax actuator for industrial adjustable temperature switch control Supply to Indonesia Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for OEM Factory for TU-1C03 thermal wax actuator for industrial adjustable temperature switch control Supply to Indonesia, The product will supply to all over the world, such as: luzern , Wellington , United States , We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
Visit us at https://www.apwdistributing.com/
Today, we are going to demonstrate how to replace the unloader on your Pw style Pressure Washer pump. The tools you are going to need for this are a flat head screwdriver and a rubber mallet. The first step is to pry off the pin securing the unloader to the manifold using the flat head screwdriver. Next, you will want to insert the screwdriver between the coils of the unloader and use the manifold as a fulcrum to pop the unloader free. Before installing the new unloader, make sure that the unloader stem moves freely back and forth and also apply a layer of grease to prevent damage to the o-rings when inserting it into the manifold. When installing the unloader, you will want the outer flange to be inserted past the groove on the manifold in order to secure it with the pin. If the unloader is sitting on the groove, then the pin cannot be inserted. If you cannot get the unloader past the groove, use the rubber mallet to tap the unloader into place. Be careful not to use too much force though because you can damage it if you do. The last step in this procedure is to insert the pin into the manifold to secure the unloader into place. There’s no need to adjust the unloader because it comes pre-set.
Music: “The Wire”
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
https://creativecommons.org/licenses/by/3.0/
In this video we show you how to use the latest Power Vision feature, “Live Idle Adjustment.” You can adjust the idle speed in REAL TIME!!! Check out the video!
