OEM Factory for TU-012 thermostatic cartridge wax sensor for sanitary ware to Japan Factory

OEM Factory for
 TU-012 thermostatic cartridge wax sensor for sanitary ware  to Japan Factory

Short Description:

Product Detail

Product Tags

We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental top-grade and high-tech enterprises for Electric Actuator Advantages , Air Conditioner Part , Wax Actuator , Our company warmly welcome friends from all over the world to visit, investigate and negotiate business.
OEM Factory for TU-012 thermostatic cartridge wax sensor for sanitary ware to Japan Factory Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.


Product detail pictures:

OEM Factory for
 TU-012 thermostatic cartridge wax sensor for sanitary ware  to Japan Factory detail pictures


To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for OEM Factory for TU-012 thermostatic cartridge wax sensor for sanitary ware to Japan Factory, The product will supply to all over the world, such as: Bahamas , America , Provence , We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Allow us to work together to write a brilliant new chapter!



  • Installation of new motor bearing the EZ way. Including side cover



    https://sirs-e.com/ | https://sirs-e.com/shop/dmx-gender-changers/dmx-adapter-3-pole-female-to-5-pole-male/
    SIRS Electronics, Inc. | USA Phone: 956-522-2006
    Tambien Hablamos Espanol.

    DMX-512A Protocol originated as a way to control multiple channels from a single digital control center. This technology became the universal protocol for a lot of different lighting and stage effect manufacturers, making operation much easier due to more compatible units. Still one problem remains; some fixtures and controllers are 5 pin, and some are 3 pin.

    The standard of DMX-512A when it was invented was a 5 pin XLR connector, or cannon jack. The main reason behind this was to differentiate DMX lighting signal from audio signals. If an audio signal would accidentally be plugged into an audio signal cable, damage may occur.

    Also different manufacturers used pins 4 and 5 for secondary or auxiliary data ports, but DMX is primarily controlled using only 3 pins. Pin 1 is Ground, pin 2 is data Negative and pin 3 is data Positive. Pin 4 would be secondary data Negative and pin 5 secondary data Positive.
    To convert from 5 pin to 3 pin, different adapters are available.

    There is the 70029 adapter and the 70030 adapter. You can find these on our website to easily convert your connectors. If you want to change a connector in a cable you can do so. Only the first 3 pins on the 5 pin end are used. Please take a look at the diagram on the video for further reference.

    Products Link
    DMX Adapter 3 Pole Female to 5 Pole Male https://sirs-e.com/shop/dmx-gender-changers/dmx-adapter-3-pole-female-to-5-pole-male/
    DMX Gender Changers https://sirs-e.com/product-category/pro-audio/led-dmx-audio-accessories/dmx-gender-changers/
    Sunlite Suite2 Line https://sirs-e.com/product-category/dmx-control/dmx-software-controller/sunlite-suite-2/
    ENTTEC USB PRO https://sirs-e.com/shop/dmx-usb-pro/dmx-usb-pro-enttec-70304-genuine/
    Daslight Line https://sirs-e.com/product-category/dmx-control/dmx-software-controller/daslight/

    Thank You for Watching!

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !