Hot Selling for TU-1J90 thermal wax actuator for industrial thermostatic water regulations mixing valve for South Korea Importers
Short Description:
Product Detail
Product Tags
Hot Selling for TU-1J90 thermal wax actuator for industrial thermostatic water regulations mixing valve for South Korea Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Hot Selling for TU-1J90 thermal wax actuator for industrial thermostatic water regulations mixing valve for South Korea Importers, The product will supply to all over the world, such as: Poland , Iraq , Washington , We always adhere to follow the honesty, mutual benefit, common development, after years of development and the tireless efforts of all staff, now has perfect export system, diversified logistics solutions, comprehensive meet customer shipping, air transport, international express and logistics services. Elaborate one-stop sourcing platform for our customers!
Click here to purchase the GM 4L60E DVD https://store.boxwrench.net/GM-4L60E-Transmission-Rebuild-DVD_p_32.html
GM 4L60E Transmission Rebuild DVD: Valve Body – Removal
The first step to installing a Automatic Transmission Shift Kit is to remove the transmission pan and Valve Body that is located inside the pan.
BoxWrench.net is a community and resource designed for automotive enthusiasts.
Get the full DVD with all of the sections here…
https://store.boxwrench.net/GM-4L60E-Transmission-Rebuild-DVD_p_32.html
Get our full “Basic Engine Building” DVD with all of the interactive menus, Tools section and engine Glossary terms here…
https://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html
Don’t forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here…
https://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html
New Transmission DVDs and a Differential Rebuilding DVD just added.
https://www.boxwrench.net – Educating the Automotive Enthusiast!
BoxWrench on Facebook:
https://www.facebook.com/boxwrench
Today we’re going to show you how to remove the front seat of an Audi A4 B6/B7.
Step 1: Move the seat to the most forward position possible
Step 2: Tilt it up and for ease, put the back forward too
Step 3: Slide up the seat belt panel
Step 4: Loosen the clip inside and push it down to detach bottom portion of the belt
Step 5: Go behind the seat and remove the two rear bolts from the guards
Step 6: Use a pry bar to remove the push pins underneath the guards
Step 7: Slide off the guards
Step 8: Undo the two bolts in the track and remove them
Step 9: Move the seat all the way back
Step 10: Remove the same push pin up front, as you did from the back
Step 11: Undo the bolts from the front track and remove them
Step 12: Get the seat to the center position of the track and tilt it backwards
Step 13: Pull panel on the floor off
Step 14: Pinch the clip to detach
*Make sure your battery is off
Step 15: Pull up wiring
Thanks for watching Wolf Auto Parts’ video! We are located at 135 Nelson Blvd. in Montrose, Minnesota. We are a salvage yard specializing in recycled Audi parts. We take pride in our parts, removing each one from the cars we take in and giving it a thorough inspection and cleaning. For more information about Wolf Auto Parts head over to https://www.wolfautoparts.com/ or call us at 1.612.424.9000.
Used Parts: https://www.wolfautoparts.com/
More How-To’s and DIY’s: https://www.wolfautoparts.com/audi-how-to-diy.html
Subscribe to our YouTube Channel: https://www.youtube.com/user/AudiPartsOnline
