High Performance Energy Storage Wax Series Export to Norway

High Performance 
 Energy Storage Wax Series Export to Norway

Short Description:

Product Detail

Product Tags

Our growth depends to the superior products ,great talents and repeatedly strengthened technology forces for Wax Linear Actuator , Automobile Thermostat Valve , Automobile Thermostat Operation , We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
High Performance Energy Storage Wax Series Export to Norway Detail:

The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.

We take the wax’s advantage characteristic which can absorb and release thermal energy in the solid-liquid transformation process to store the transferred energy to achieve making use of the most of rich energy resource. Recently years, the new technique has been researched and developed in many fields all over the world, such as new building material, textile industry, electric power, medical device, aviation and space. Some of projects have already stepped into a practical and commercial stage

To conform to market requirement, we have a very good cooperation with some Chinese famous Universities, Scientific Institutions & enterprises to develop and research in energy storage wax.. Some projects have already stepped into a practical stage

 

Name

Model

Melt Point
(℃)

Mechanical Impurities (%)

Water-Solubility Acid and Alkali

Appearance

Energy Storage Wax

E20

20

Non

Non

White-Yellowy Liquid

Energy Storage Wax

E21

25

Non

Non

White-Yellowy Liquid

Energy Storage Wax

E22

30

Non

Non

White-Yellowy Liquid

Energy Storage Wax

E23

35

Non

Non

White-Yellowy Liquid

Energy Storage Wax

E24

40

Non

Non

White-Yellowy Solid

Energy Storage Wax

E25

45

Non

Non

White-Yellowy Solid

Energy Storage Wax

E26

50

Non

Non

White-Yellowy Solid

Energy Storage Wax

E27

80

Non

Non

White


Product detail pictures:

High Performance 
 Energy Storage Wax Series Export to Norway detail pictures


We have now sophisticated machines. Our solutions are exported to the USA, the UK and so on, enjoying a great reputation amid consumers for High Performance Energy Storage Wax Series Export to Norway, The product will supply to all over the world, such as: Turkey , Las Vegas , Boston , We insist on the principle of "Credit being primary, Customers being the king and Quality being the best", we are looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.



  • https://www.dunkermotoren.com Demonstration of the complex gantry systems that can be designed and built using Dunkermotoren ServoTube linear motors. Shown is a 3-axis system including 2 X-axis motors (X and X prime) with a single drive; 2 Y-axis motors acting independently on the same rod, and 2 Z-axis motors with the high rigidity system for pick and place, welding, sampling, or even stamping of products under the gantry. This system is easily expandable with additional X , Y and Z axis motors for even more complex systems. Utilizing the linear motors’ high accelerations and speeds means that the processes can be done faster, thus increasing the throughput of the overall application.



    How to backup data – IAI SEL type Controller – Electric Actuator

    https://www.intelligentactuator.com/x-sel-pc-interface-software-tutorial/

    Connection Confirmation…
    Setting of Two or more Program…
    Controller – All Data Backup – Save File As, etc…
    – see details on the video —

    The XSEL PC Software is used with IAI’s fully programmable controller line. These controllers include the X-SEL, ASEL, PSEL, and SSEL as well as many older SEL controllers. The XSEL PC software is fully programmable and can perform many of the same functions as a small PLC.

    Establishing Communications

    The software may display the menu above when the X-SEL PC Interface software is started. Notice that a few of the menu options are unavailable. This is an indication that the software was unable to communicate with the controller (i.e. you are off-line). This may be due to the serial communication cable that is not secure to the PC and/or the X-SEL controller. Also make certain that the controller is ready to communicate by having the Teaching Serial Interface Port switch in the “‘MANU” position.

    Once communications has been established, all menus should become available as shown in the image above. To reestablish communications if accidentally lost, go to the ‘”Controller” menu and drop to “Reconnect”. The software will attempt to reestablish communication.

    Clearing Common Errors

    A possible error that may occur is the “EE6C-DO output current error”. This error is indicating that the digital IO card not being supplied 24VDC. In this case, it is important to check the wiring, polarity and 24V power supply to the controller as shown in the X-SEL Operation Manual. The error may also occur if the controller powers up before the 24VDC is applied to the controller. Once this error has occurred, it will persist until the controller is reset. The error will also be displayed on the 4-digit 7-segment display on the controller.

    Another error that may occur is the “ErG” error, that is indicated only the 4-digit 7-segment display of the controller. This error is simply e-stop. The X-SEL controller has a dedicated e-stop terminal at the System IO connector. This should be normally closed contact. While the controller is in Manu mode the e-stop connection of the Teaching/Communication Port becomes active. Also check the e-stop button of the IAI serial communication cable to release e-stop.

    Another error that may occur is the “ECA1- ABS Data Backup Battery Voltage Low Error (Driver)” error. This error is encountered on an X-SEL system equipped with absolute encoders. The following section will discuss this situation in greater detail.

    Homing

    The “ECA1″ error will be encountered on a X-SEL equipped with absolute encoders. This error is an alert that the absolute encoders have lost battery power resulting in a loss of positional information. The power loss may be due to a dead battery. In most cases, however, it is simply caused by disconnecting the encoder from the controller. The encoder battery is located on the controller for easy replacement. Once reconnected, the absolute encoders will have to be reset/homed to clear this error.
    Absolute Encoder Reset Menu
    Absolute Encoder Reset Menu

    The Absolute Encoder Reset Menu provided a quick and easy way to reset the encoders. To open this window go to the “Controller” menu and select “ABS. Encoder Reset”. At the top of the window, there is a drop-down menu that allows you to select the axis (1,2,3 or 4 depending on the system). Once an axis is selected simply click on the button indicated by the red arrow. As you progress the arrow will move next button indicating when the next step should be executed. Once all axis are reset go to the “Controller” menu and select “Software Reset”. This will reset the controller which completes the homing procedure.

    In the case of incremental encoders, the actuators would have to be homed every time that the controller powered up. This can be done with the “HOME” command in a program or it can be done through the point menu (see below). During e-stop the encoders maintain encoder power, making homing afterward unnecessary.

    Points

    The point table stores all positional information. The controller can store up to 3000 unique points. This menu will also provide servo control so that motors can be turned on, off, jog in both directions and move to taught positions on all selected axis or specific axis.

    Consider this window as a snapshot of what is stored on the controller. Anything that is typed on this window will not automatically be stored in the controller. The icon “Transmit to Controller” must be used to store the information in the controller. The prompt “Write to FLASH ROM?” asks the information should be stored in Flash ROM or RAM memory….

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    WhatsApp Online Chat !
    Close