High Efficiency Factory TU-1C01 thermal wax actuator for air conditioner and compressor Export to Bahrain
Short Description:
Product Detail
Product Tags
High Efficiency Factory TU-1C01 thermal wax actuator for air conditioner and compressor Export to Bahrain Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We provide good power in high-quality and progress,merchandising,revenue and internet marketing and operation for High Efficiency Factory TU-1C01 thermal wax actuator for air conditioner and compressor Export to Bahrain, The product will supply to all over the world, such as: Malawi , Irish , Canada , Our products are mainly exported to Europe, Africa, America, the Middle East and Southeast Asia and other countries and regions. We have enjoyed a great reputation among our customers for quality products and good services.We would make friends with businessmen from at home and abroad, following the purpose of "Quality First, Reputation First, the Best Services."
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today on This Old Trailer we are going to replace hydraulic brakes with electric brakes. Basically it is going to be a matter of taking off the tires, removing the hubs, go ahead and removing the backing plates and drain the hydraulic lines of fluid, and then going ahead and bolting on the new brakes. We will start off, obviously, by taking the wheels off. OK, go ahead and remove the dust cover here. It is an E-Z Lube spindle so this has a tang washer that we need to bush back down so we can unlock the castle nut right here. Just push it back down. Now we should be able to take the hub right off. The next task is to go ahead and disconnect the hydraulic lines. We have that disconnected. Now we need to pull the clip out so we can release this part here. And that is just a little piece of metal right here that you can just pry out. Alright, now we can unbolt this at the back of the hydraulic backing plate. Alright, now we can unbolt the backing plate from the flange on the axle. Now we are down to our bare axle. We will clean it up a little bit and then reinstall the brakes. 1:24
The engineers at H2W have developed our most compact voice coil positioning stage to date. The customer for this stage requested that it fit within a volume of 1.6 cubic inches (40 cubic mm) cube volume. The application required an ultra-compact stage due to space restrictions in their auto-focus mechanism.
The voice coil positioning stage (VCS02-001-CR-01-MC) is a closed loop system that can be used for high speed positioning and auto-focusing applications. The stage is driven by a NCC type actuator (NCC02-07-001-1R) and is guided by a precision linear crossed roller bearing. The voice coil has a 0.20″ [5.1 mm] stroke; generates 0.26 lbs [1.16 N] of continuous force and 0.78 lbs [3.50 N] of peak force. It includes a 1 micron resolution magnetic linear encoder. Voice coil positioning stages are ideal for applications that require quick, short moves with fast settling times.
Features:
- Compact footprint
- No moving cables
- High acceleration
- Custom strokes and force configurations available
H2W Technologies is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.
Other motion control products include: limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.
With over 85 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control requirements.
For additional information please contact H2W Technologies, 26380 Ferry Court, Santa Clarita, CA 91350; Tel: (661) 291-1620, Fax: (661) 291-1626, E-Mail: info@h2wtech.com or visit the website at www.h2wtech.com.
