Good User Reputation for Electric Wax Series to Greece Manufacturer
Short Description:
Product Detail
Product Tags
Good User Reputation for Electric Wax Series to Greece Manufacturer Detail:
(1) Special Seal Wax for Electronic Elements
This series of products have very good moisture proof capability and good capability for enduring temperature changed. Its’ hardness and viscosity are temperate, and it’s pliability and plasticity are well. They have excellent electrical property parameters. Their high frequency loss is few. They have no any corrosion. Their various processing property are stable.
This series of products are mainly applicable for dipping electrical coil such as electronic tuner coil, various oscillator coils, adjustable inductance electronic component, electronic transformer and color TV luminance delay，thermal seal to some materials.
(2) Dipping Seal wax for Various Capacitors
This series of products have eight grades, which their common characteristic are excellent insulating property, well moisture proof capability, low loss, well compatibility and oxidation resistance. The drop melting point from 65℃ to 145℃, can be adapt to the demands for insulating envelopments with different ranges.
This series of products are mainly applicable for dipping envelopment of the electronic elements such as line-motivating transformer, color TV delay coil, various film and paper capacitor, porcelain capacitor, etc.
(3) Sealing wax for Power Capacitor
This series of products have outstanding insulation impedance and low loss. They have a suitable air-absorption capacity and appearance surface. Their performance is stable. They have a suitable hardness and viscosity, non-poisonous, tasteless and low acid value.
This series of products are mainly applicable for dipping & seal of the metallic capacitor such as the low-voltage power capacitor, alternating current capacitor, household appliances capacitor, etc.
Product detail pictures:
All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Good User Reputation for Electric Wax Series to Greece Manufacturer, The product will supply to all over the world, such as: Doha , Amman, Berlin , Regarding quality as survival, prestige as guarantee, innovation as motive force, development along with advanced technology, our group hopes to make progress together with you and make untiring efforts for the bright future of this industry.
Automatic FFS detergent powder filling sealing packaging machinery Verpackungsmaschinen fuer Waschpulver
This packaging equipment can do the work of bag-making, weighting, filling, filling the nitrogen, date coding, and bag-cutting. It is suitable for packing power and granule material such as milk tea, monosodium glutamate, solid beverage, sugar, grape sugar, coffee, feedstuff, solid medicine, powder type additive, and dye, etc.
more information at https://penglaichina.com as well as https://penglaimachine.com
Main performance and functional characteristics on screw feeding system automatic FFS detergent powder form fill seal equipment:
1. Equipped with safety protection, comply with firm’s safety management requirements.
2. Use intelligent temperature controller to have accurate temperature, which ensures the artistic and neat seal.
3. Use PLC Servo System and pneumatic control system and super touch screen to compose the drive control center, which maximize the whole machine’s control precision, reliability and intelligentized level.
4 Touch screen can store the technical parameters of various kinds of products, it is unnecessary to reset while products changing.
5. With error indicating system, which help to handle the trouble immediately.
6. Make pillow bags and hanging bags in terms of customers’ different requirements.
Technical Specifications of packing machine FFS Vertical:
Model YX-398D
Bag size L (80-400) ×W (80-250) mm
Packing speed 5-60 bags/min
Measuring range 150-1200 ml
Max width of film roll ≤520 mm
Air consumption 0.65 mpa
Gas consumption 0.4 m3/min
Power requirement 220 V, 50 HZ, 2.2 KW
Machine size L 1150 * W 1795 * H 1650 mm
Machine weight 600KG
For more information about the Automatic FFS detergent powder filling sealing packing machine Verpackungsmaschine fuer Waschpulver or other cosmetic food pharmaceutical fillign packaging machines from PENGLAI INDUSTRIAL CORP,Send us by email jackdu999@yahoo.com or browse our BUSINESS WEBSITE https://youtube.com/user/mrjackdu007
Skype: turnanewleaf
Email: jackdu999@yahoo.com
Tel:+86-15811882441
www.cosmeticsmachinery.blogspot.com
www.penglaichina.com
Another heliostat tracking idea. This one uses gearing. This is another do-it-yourself or low cost cost/complex system, however, the system needs to be initialy aimed by the user if only basic electronic sensing is used.. With the light sensing method, the sensors will detect the brightest spot in the sky and “steer” the mirror to positon automatically without any controlled timing.
In the video diagram, R stands for the radius length of the corresponding circle/disk indicated.
If you increase the size of a gears (toothed, pulley, or friction contact) when a force is applied there is more torque available due to the more basic “lever arm” (mechanical advantage “gain”) effect. Lever arm is basically somewhat like a balancing beam concept. The beams or levers physical rotation point or axis is called the fulcrum. We know that when a balanced uniform lever gets unbalanced, such as from moving the fulcrum or rotation point away from one side, it will rotate due to the unbalance (of gravity forces, ie weight, etc., acting on each side of the beam). However, the beam could also rotate in any direction, and that depends on which side has the most force applied. Both sides of the lever (or “lever arms”) will rotate the same amount of degrees (angle) always on each side of the fulcrum no matter where it is located along the levers length, however the end of the longest lever will move a greater distance (and technically it’s not just a straight distance (such as a height distance) but a curved one or arc). Now by adjusting the fulcrum (ie rotation point), you can get an “amplification” of the forces applied to one end of the lever appearing at the other end of the lever, however, the distance that you apply the force to that side of the lever will be longer since that side of the lever is longer as mentioned. Basically if the lever arm doubles in length then the force applied will be doubled (ie. equally amplified or gain as the length is increased/gained) on the other end of the shorter (here, half-sized) lever. In theory, with an ideal system, you can balance a ton of stone with a grain of sand if the lever arm is long enough, and with another grain of sand added to the first grain, the stone will begin to move due to the unbalance. In the cases of lever arm systems (a mechanical energy transformer), the force (F) multiplied by the distance (D) the force is applied is equal on both sides of the lever:
F left X D left = F right X D right
Lets call F left as F output, and F right as F input, and solving for it mathematically, we get:
Foutput = ( F input x D input ) / D output
Which can be written as:
F output = F input ( D input / D output )
So we see the output Force is essentially equal to the input Force times the ratio of the distances. Note that the output Force is inversely related to the output distance. The shorter the output distance, the greater the output force and vice-versa.
So it’s not magic that lets you lift heavy weights with this lever method, it’s actually due to “conservation of energy” or “energy out = energy in”, basically a balance or equivalence. Much of the reasoning of lever action can be applied to gears and “pully” systems.
I believe the visible disk of the Sun is about 0.5 (half) a degree wide as we see it. Errors can happen, especially if the sensors are perhaps aimed at the edge of the sun someplace, hence this system is for less critical systems initially, such as for a single mirror heliostat with the light aimed at a solar collector.
This mechanical angle bisector (half the angle) can have other uses besides with heliostats. For example, there could be uses for cameras and lasers.
Gears are very much like transformers in the electric field of study. There, power from one side to the other is transferred via magnetic field. The power out is the same as the power in, except that either the voltage or current has changed usually, and those changes are inverse of each other. The change basically happens due to the sizes (ie. windings) of the two coils in the transformer. WIth gears, power is mechanically transferred via mechanical forces or frictions of the two gears. Again, power out is the same as power in, the difference now is that torque (a turning or twisting force) and speed (of rotation) can be altered by the size of the gears. You could say that gears are mechanical transformerrs of force energy.
Also, Gear 2 will rotate in the opposite direction than Gear 1. For example, if Gear 1 rotates clockwise, Gear 2 will rotate counter-clockwise. If you needed Gear 2 to rotate the same direction as Gear 1, you could use a “buffer” gear, of equal radius size as Gear 2, placed between Gear 1 and Gear 2 and this will effectively change the direction of rotation of Gear 2. When the gears are the same size, it’s more of a “transfer” of energy rather than a “transformer” of energy.
