Factory source manufacturing TU-1F93 thermal wax actuator for thermostatic automatic water drain valve for New Zealand Importers
Short Description:
Product Detail
Product Tags
Factory source manufacturing TU-1F93 thermal wax actuator for thermostatic automatic water drain valve for New Zealand Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We aim to find out high quality disfigurement in the generation and provide the most effective services to domestic and abroad clients wholeheartedly for Factory source manufacturing TU-1F93 thermal wax actuator for thermostatic automatic water drain valve for New Zealand Importers, The product will supply to all over the world, such as: US , Cape Town , kazan , With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
VTEC or Valve Timing Electronic Control is a system that’s been used by Honda in passenger cars since 1991. I believe the 1991 NSX was the first production …
“This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.
For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!
This is the panel you’ll use to set the climate control system.
The Auto mode may be used all year round. To turn it ON, press this button for automatic cooling or dehumidified heating. The indicator light turns ON when the system is activated. It will automatically regulate and maintain fan speed, airflow and temperature in the cabin.
The AUTO function can be turned OFF by either changing the fan speed, or by pressing the DEFROSTER, MODE, or ON/OFF button.
To reactivate automatic control, press the AUTO button.
To turn the system OFF completely, press the ON/OFF button.
Your vehicle has separate temperature control knobs for the driver and front seat passenger. The driver’s temperature control will set the temperature for both driver and passenger, if the DUAL control is not activated. Turn the driver’s side control knob. You’ll see the temperature setting change on the monitor. Turn it to the left for cooler, or to the right for warmer air.
If you want to adjust the passenger side temperature independently from the driver’s side, press the DUAL button or turn the passenger’s side temperature control knob.
The DUAL control indicator light will then illuminate. Turn it to the left for cooler, or to the right for warmer air. To switch back to driver control, press the DUAL button again.
The MODE button provides a choice of airflow outlets. Press repeatedly to cycle through these choices:
● Air flows from the center and side vents
● Air flows from center and side vents, and foot outlets
● Air flows mainly from foot outlets,
● Air flows mainly from the defroster and foot outlets Press the A/C button to turn the air conditioning ON or OFF.
In hot or humid conditions, a visible mist may be seen coming from the vents. This does not indicate a malfunction.
To recirculate air inside your vehicle, press this AIR RECIRCULATION button, its indicator will light up. This helps A/C efficiency and helps block outside odors from entering the cabin. Be aware that the Air Recirculation feature does not function when the front defroster setting is selected. Press the FRESH AIR INTAKE button to allow outside air to be drawn into your vehicle. Allowing outside air to enter the vehicle improves defogging performance.
This button operates the fan speed.
Push this button to increase fan speed and this one to decrease fan speed.
When you manually change fan speeds, it turns off the automatic climate control mode. To return to automatic climate control, press the AUTO button.
To defrost or defog the front and side windows, press the DEFROSTER button. The indicator light will illuminate. Air flow will be directed to the front and side windows. The indicator light on the A/C button may also illuminate because the A/C compressor is activated to help dry the air and improve window clearing performance. The air can still be fully warmed with the A/C activated.
If activated, the air recirculate mode will turn off automatically. Allowing outside air to be drawn into the passenger compartment to further improve the defogging and deicing performance.
If your vehicle happens to be in Dual mode, turning ON the defroster will revert to driver control, so both sides of the windshield will defrost evenly. Turn the driver’s side temperature to a setting that will best meet weather conditions.
For windshield deicing, your temperature selector should be turned to maximum heat and turn the fan speed to high.
As soon as possible after the windshield is cleared, press the AUTO button to return to AUTO mode. The system will return to your previous settings. Pressing the defroster button for a second time will also revert to auto mode.
To defrost or defog the rear window and, if so equipped, the outside mirrors, push the REAR WINDOW DEFROSTER switch. The indicator light will illuminate. After defrosting, push to turn OFF. If not turned OFF manually, this feature will automatically deactivate in a period of time.
There is a temperature sensor located on the top of the dashboard near the windshield that helps regulate the automatic climate control settings. Please keep this area clear of papers and other materials.
Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
”
