factory Outlets for TU-011 thermostatic cartridge wax sensor for sanitary ware for Botswana Factories
Short Description:
Product Detail
Product Tags
factory Outlets for TU-011 thermostatic cartridge wax sensor for sanitary ware for Botswana Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for factory Outlets for TU-011 thermostatic cartridge wax sensor for sanitary ware for Botswana Factories, The product will supply to all over the world, such as: Dominica , Curacao , Armenia , Adhering to the principle of "Enterprising and Truth-Seeking, Preciseness and Unity", with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective solutions and meticulous after-sales service. We firmly believe that: we're outstanding as we have been specialized.
A people counter is a device used to measure the number and direction of people traversing a certain passage or entrance per unit time. The resolution of the measurement is entirely dependent on the sophistication of the technology employed. The device is often used at the entrance of a building so that the total number of visitors can be recorded. Many different technologies are used in people counter devices, such as infrared beams, computer vision, thermal imaging and pressure-sensitive mats
Infrared beams
The simplest form of counter is a single, horizontal infrared beam across an entrance which is typically linked to a small LCD display unit at the side of the doorway or can also be linked to a PC or send data via wireless links and GPRS. Such a beam counts a ‘tick’ when the beam is broken, therefore it is normal to divide the ‘ticks’ by two to get visitor numbers. Dual beam units are also available from some suppliers and can provide low cost directional flow ‘in’ and ‘out’ data. Accuracy depends highly on the width of the entrance monitored and the volume of traffic.
Horizontal Beam Counters usually require a receiver or a reflector mounted opposite the unit with a typical range up to 6 metres (20 ft), although range finding beam counters which do not require a reflector or receiver usually have a shorter range of around 2.5 metres (8 ft 2 in).
Vertical beams are somewhat more accurate than horizontal, with accuracies of over 90% possible if the beams are very carefully placed. Typically they do not give ‘in and out’ information, although some directional beams do exist.
Computer vision
Computer vision systems typically use either a closed-circuit television camera or IP camera to feed a signal into a computer or embedded device. Some computer vision systems have been embedded directly into standard IP network cameras. This allows for distributed, cost efficient and highly scalable systems where all image processing is done on the camera using the standard built in CPU. This also dramatically reduces band width requirements as only the counting data has to be sent over the Ethernet.
Accuracy varies between systems and installations as background information needs to be digitally removed from the scene in order to recognize, track and count people. This means that CCTV based counters can be vulnerable to light level changes and shadows, which can lead to inaccurate counting. Lately, robust and adaptive algorithms has been developed that can compensate for this behavior and excellent counting accuracy can today be obtained for both outdoor and indoor counting using computer vision
Main concept behind this project is to measure and display the number of persons entering in any room like seminar hall, conference room. LCD or seven segment display display placed outside the room displays this value. And when number of persons inside the room are zero, power supply inside the room can be cut using a relay interface. Second part of project serves the functionality of a door-latch opening using a password entered through keypad. As well as sending this data to a computer through serial port. This module also turn on buzzer if 3 wrong passwords are entered consequently. User can change this password anytime he/she wish using a keypad.
This a short video of how the Econ button works on a new Honda and what it doesn’t do. This video is for most Honda’s. The Accord Hybrid is a little different …
